eDynamo, MagTek’s newest secure card reader authenticator, gives users the flexibility needed to securely accept a variety of payment card technologies.

Custom adapter made to form fit and secure eDynamo, magstripe and EMV chip card reader, to Elo touch screens (most models)

Welcome to the 2024 product catalog. MagTek sells to VARs, ISOs, ISVs, resellers, distributors, and directly to customers. Contact MagTek or your service provider to order. Founded in 1972, MagTek is a leading manufacturer of electronic systems for the reliable issuance, reading, transmission, and security of cards, barcodes, checks, PINs, and identification documents.

Provide your merchant customers with the most secure and reliable mobile card readers on the market. Financial Institutions can future-proof investments when they choose MagTek solutions. Protect your brand and enhance your customer experience with MagTek’s mobile Secure Card Reader Authenticators (SCRAs). SCRAs connect to most mobile smart phones or tablets and can capture more data with a single swipe.

Information about MagTek's mobile secure card readers. Merchants around the globe rely on MagTek’s mobile Secure Card Reader Authenticators (SCRAs). MagTek’s SCRAs capture data with a single swipe and offer the reliability and flexibility retailers need for ease-of-use. SCRAs are powered by the MagneSafe™ Security Architecture (MSA) which delivers dynamic card authentication, data encryption, tokenization, and device/host authentication to protect customers from identity theft and card fraud.

Developers often couple this with D998200191, Programming Manual, and the XML/SOAP zip examples found under software, D998200391 (MPPGv3) or D998200457 (MPPGv4). The Magensa Payment Protection Gateway (MPPG v3/4) provides POS integrators an interface to various merchant processors for magstripe and EMV (chip card) transactions using MagTek readers. This guide outlines the steps to integrate and certify to MPPG for EMV processing.

This document provides instructions on how to interact with MagneFlex Navy, browser-based for USB SCRAs and PIN PED devices

eDynamo Secure Card Reader Authenticator Programmer’s Reference (COMMANDS)

Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo (Gen I, II), DynaWave, and iDynamo 6, Programmers Reference ( C++ )

This document provides instructions to use the MTSCRA Demo on macOS. It is part of a larger library of documents designed to assist uDynamo, Dynamag, DynaMAX, eDynamo, mDynamo, BulleT, and Secure Card Readers implementers.

Pursuing an L3 Certification (Level 3 Certification) with an EMV (Europay, Mastercard, Visa) payment processor involves several steps. Level 3 Certification typically pertains to testing and certifying integrated circuit cards (ICCs) with advanced functionalities, such as contactless payments. Here are the general steps you might follow, but keep in mind that specific requirements may vary based on the EMV payment processor and the region.

This document describes the properties, methods and events provided by the Java Applet component to communicate with MagTek Bluetooth Readers. For additional information, refer to the reader the Bluetooth Reader specific manual.

This document provides instructions for software developers who want to create software solutions that include a Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo (Gen I, II), DynaWave, or iDynamo 6 connected to a Windows-based host via USB or Bluetooth LE.

JMSR Applet transfers Card data from MagTek USB Card Reader device to a host program. The applet is a signed/trusted applet. MagTek HID Card Reader Programming Reference Manual

This document provides EMV transaction flow instructions for software developers who want to create software solutions that include a MagTek Secure Card Reader / Authenticator (SCRA) device connected to a Windows PC, Android, or iOS device.

This document provides instructions for software developers who want to create .NET software solutions that include MagTek devices connected to a Windows based host. MagTek Universal SDK (MTUSDKNET) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK. This document is part of a larger library of documents designed to assist MagTek device implementers. The following documents are essential: • D998200383 DynaFlex Products Programmer’s Manual ( COMMANDS ) • D998200382 DynaFlex Family of Products Installation and Operation Manual

This document provides instructions for software developers who want to create custom software solutions that communicate with Dynamag, DynaMAX, eDynamo, mDynamo, uDynamo, or BulleT connected to a macOS host via USB or wireless.

Dynamag, DynaMAX, eDynamo, mDynamo Secure Card Reader Authenticator Programmer's Reference (WEBAPI)

eDynamo, Dynamag and DynaMAX Programmer's Reference Guide Instructions for software developers. This document provides instructions for software developers who want to create software solutions that include a Dynamag, DynaMAX, or eDynamo connected to a Windows-based host via USB or BLE.

aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, iDynamo 6, iDynamo 5 (Gen III), BulleT Secure Card Reader/ Authenticator .Net/PCL Programmer's Reference Manual (Windows / Windows Phone)

This document provides instructions for software developers who want to create software solutions that include a MagTek Secure Card Reader Authenticator (SCRA) device connected to an Android device via the Audio/Headset Interface, Bluetooth, BLE (Bluetooth 4.0 Low Energy), or USB. (Including aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, iDynamo 5 (Gen III), BulleT Secure Card Reader Authenticators)

ADYNAMO, UDYNAMO, DYNAMAG, DYNAMAX, EDYNAMO, MDYNAMO, BULLET, TDYNAMO, DYNAWAVE, IDYNAMO 5 (GEN III) MAGTEK SCRA DEMO AND OEM DEMO GUIDE (ANDROID) This document provides instructions to use the MagTek SCRA Demo and OEM Demo. It is part of a larger library of documents designed to assist Dynamag, DynaMAX, Dynamo, mDynamo, tDynamo, DynaWave, and Secure Card Readers implementers.

This document provides instructions for software developers who want to create custom software solutions that communicate with DynaMAX, eDynamo, aDynamo, iDynamo, uDynamo, kDynamo, sDynamo, or tDynamo connected to an iOS host via audio connector or BLE. It is part of a larger library of documents designed to assist DynaMAX, eDynamo, aDynamo, iDynamo, and uDynamo, kDynamo, sDynamo, tDynamo implementers.

The purpose of this document is to provide a description of how to use the MagTek Reader Configuration Program for Remote Configuration and Key Injection for MagneSafe® devices.

Frequent questions are answered for the eDynamo.

Specifications for resellers to add their custom label to the optional enclosure for eDynamo

This specification is intended to describe the parameters and operation of the MagTek Smartcard contact Block in order to enable customers to integrate the Contact Block into OEM reader designs.

eDynamo Installation and Operation Manual. eDynamo, MagTek’s secure card reader authenticator (SCRA), gives users the flexibility needed to securely accept a variety of payment card technologies. Whether accepting a traditional magnetic stripe card or a contact EMV card, eDynamo gives merchants the ability to connect via USB or Bluetooth LE, delivering one reader for mobile or stationary needs. This design leads to saving the user money on a single, low-cost, yet highly secure device.

eDynamo gives users the flexibility needed to securely accept a variety of payment card technologies. Whether accepting a traditional magnetic stripe card or a contact EMV card, eDynamo gives merchants the ability to connect via USB or Wireless, delivering one reader for mobile or stationary needs.

The purpose of this document is to walk users through the steps to update MagTek eDynamo, through Bluetooth LE, with the latest firmware, EMV tags, and CAPK files as required by the Card Brands. This process requires the use of MagTek’s free Reader Management System iOS app. This update process should take less than 15 minutes per device.

The purpose of this document is to walk users through the steps to update MagTek eDynamo, through USB, with the latest firmware, EMV tags, and CAPK files as required by the Card Brands. This process requires the use of MagTek’s free Reader Management System application. This update process should take less than 10 minutes per device.

A response to a publication in March 2019, by NIST (National Institute of Standards and Technology) entitled: “NIST Special Publication 800-131A Revision 2 – Transitioning the Use of Cryptographic Algorithms and Key Lengths”.

MagTek and Magensa deliver hardware, software, and services for mobile and contactless solutions. The dramatic shift in how business is conducted, from restaurants and retail to banks and hospitals, requires tools and services that provide an agile and secure response.

MagTek delivers more clicks for Payment Processors with reliable services and secure hardware.