Increase card activation and usage while enhancing cardholder satisfaction and security with ExpressCard 2000.

Overview of ExpressCard 2000 for retail merchants, casinos, and for college campus.

This service manual explains how to repair the Gripper Motor.

This document provides steps for using 1000004608 ASSEMBLY, RETROFIT KIT, TIPPER MODULE MOTOR PATCH CABLE, EC2000 to install patch cable 1000004557 in-line between the EC2000 main logic board and the motor that drives the wheels on the tipper module’s ramp. This allows the device to drive the motor at faster speeds when moving cards.

This service manual explains how to service the main logic board.

To close the maintenance call after completing ExpressCard 2000 preventive maintenance, Service Technicians must fill out both pages of this checklist.

This document provides detailed information about maintaining the ExpressCard 3000, 2000, and 1000.

This service document explains how to replace the lid for the ExpressCard device.

Instant Issuance Card Personalization System Preventive Maintenance Procedure

This document provides a list of replacement parts and their subsequent service procedure manual.

This document explains service for tipping emboss areas.

This document explains service for XY transport cable retrofit.

This technical reference document explains margin settings.

Instant Issuance Card Personalization System User Installation and Operation Manual for the ExpressCard 2000

This document describes the security policy for ExpressCard devices.

MagTek knows that designing your own instant issuance cards can be achallenging task. That is why we have created this card design documentto help you design your own cards, and better understand what cardformats you need in order to produce beautiful custom cards thatdistinguish you from your competitors.

ExpressCard 2000 Quick Installation Guide

EMV Migration Forum: Implementing EMV in the U.S.: Best Practices in Support of EMV Instant Issuance

A response to a publication in March 2019, by NIST (National Institute of Standards and Technology) entitled: “NIST Special Publication 800-131A Revision 2 – Transitioning the Use of Cryptographic Algorithms and Key Lengths”.