DynaFlex II Go is a secure card reader authenticator in a small form factor that is ready to accept tap, swipe, and dip payments in a wide variety of retail environments. The small form factor is ready for countertop and mobile devices with USB or Bluetooth® LE connection. Start accepting mobile wallets including Samsung® Pay, Google® Pay and Apple® Pay via NFC Contactless or accept card payments via EMV® Contactless, EMV Contact Chip, and magnetic stripe.

MagTek Dyna family of devices bring a new level of security to your point-of-sale platform with dynamic authentication, encryption, and tokenization. Using triple DEA or AES encryption and DUKPT key management they make transactions more secure. The newest Dyna products include DynaFlex II, DynaFlex I, DynaFlex II Go, and DynaProx. These devices are ready for payment and non-payment acceptance.

Welcome to the 2024 product catalog. MagTek sells to VARs, ISOs, ISVs, resellers, distributors, and directly to customers. Contact MagTek or your service provider to order. Founded in 1972, MagTek is a leading manufacturer of electronic systems for the reliable issuance, reading, transmission, and security of cards, barcodes, checks, PINs, and identification documents.

DynaFlex II Go is a secure card reader authenticator in a small form factor that is ready to accept tap, swipe, and dip payments in a wide variety of retail environments. The small form factor is ready for countertop and mobile devices with USB or Bluetooth® LE connection. This document provides direction on checking for signs of tampering.

DynaFlex II Go products are PCI PTS v6.x SCR, certified. The packaging is designed to be tamper evident and the closure uses security tape. Any attempt to open the package shows signs of tampering. This document explains how to detect tampering.

This document addresses the proper use of the DynaFlex II Go in a secure manner. This includes information about key-management responsibilities, administrative responsibilities, device functionality, identification, and environmental requirements.

This document provides instructions on how to interact with MagneFlex Navy, browser-based for USB SCRAs and PIN PED devices

This document describes how to communicate with Secure Card Reader Authenticator (SCRA) devices which implement MagTek Messaging Schema (MMS) and the DynaFlex/DynaProx family system architecture.

Pursuing an L3 Certification (Level 3 Certification) with an EMV (Europay, Mastercard, Visa) payment processor involves several steps. Level 3 Certification typically pertains to testing and certifying integrated circuit cards (ICCs) with advanced functionalities, such as contactless payments. Here are the general steps you might follow, but keep in mind that specific requirements may vary based on the EMV payment processor and the region.

This document provides instructions for software developers who want to create Android software solutions that include MagTek devices connected to an Android based host. MagTek Universal SDK (MTUSDK) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK.

This document provides the instructions to use the MagTek Universal SDK Demo with a DynaFlex, or DynaProx device connected to an Android host via USB. It is part of a larger library of documents designed to assist implementers.

This document provides instructions for software developers who want to create .NET software solutions that include MagTek devices connected to a Windows based host. MagTek Universal SDK (MTUSDKNET) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK. This document is part of a larger library of documents designed to assist MagTek device implementers. The following documents are essential: • D998200383 DynaFlex Products Programmer’s Manual ( COMMANDS ) • D998200382 DynaFlex Family of Products Installation and Operation Manual

This document provides instructions to use the MTUSDKNET Demo. It is part of a larger library of documents designed to assist Secure Card Readers implementers.

This document provides instructions to use the DynaFlex, DynaProx Utility software for demonstrating EMV transactions, configuration, and firmware updating. It is part of a larger library of documents designed to assist implementers.

This document provides instructions to use the OID Converter Console. It is part of a larger library of documents designed to assist Secure Card Readers implementers, which includes the following documents available from MagTek: - D998200380 MAGTEK UNIVERSAL SDK PROGRAMMER'S MANUAL (Windows .NET) and - D998200383 DynaFlex Family Programmer’s Manual (COMMANDS)

This document provides instructions to use the MTUSDKNET EMVConfiguration Console. The console sends either a .BIN file or contents of an Excel file to the device. BIN files are directly sent to the device. Excel files are processed by Magena Remote Services web service, then the resulting BIN data is sent to the device.

This document provides the instructions to update firmware into a MagTek DynaFlex or DynaProx device on a Windows PC via USB connection.

The purpose of this document is to provide a description of how to use the MagTek Reader Configuration Gen II Program for Remote Configuration and Key Injection for MagneSafe devices. This application is provided to MagTek Customers. Certain functions are No Charge and other functions are billable events. Please refer to the executed Remote Services Agreement and Pricing Schedule A.

DynaFlex II Go and DynaFlex II Go BCR deliver the next generation of mobile payment solutions, both models are PCI PTS 6.x. This document provides an abbreviated version of the Installation and Operation Manual, PN D998200595 hosted on www.magtek.com.