Standard Configurations
| Description | P/N |
|
Tracks 1, 2 Single head Integrated black bezel No cable |
21066000 |
|
Tracks 1, 2 Single head Integrated white bezel Cable: 6 ft. (white) |
21066008 |
|
Tracks 1, 2 Single head Integrated white bezel No cable |
21066019 |
|
Tracks 1, 2 Single head Integrated black bezel Cable: 6 ft. (black) |
21066020 |
Operating
| Reference Standards |
ISO7810 and 7811; 51 Characters on Track 1, 25 on Track 2 |
| Power Input | From RS-232 Interface or Auxiliary Power Input (some units) |
| Interface Signal | RS-232 compatible |
| Message Format | ASCII |
| Track Card Speed | 3 to 50 IPS (7,6 to 127 cm/sec) |
| Head Life | 500,000 Insertion Cycles (1,000,000 head passes) |
Electrical
|
Printed Circuit Assembly 21067502 (discontinued) |
Printed Circuit Assembly 21067505 (new unit) |
|
|
DTR Voltage (Input) VDTR |
+5 to +15 VDC operating +16 VDC absolute maximum -25 VDC absolute maximum |
+5 to +15 VDC operating +/-20 VDC absolute maximum |
| Transmit Data (TXD) | +/-5 VDC minimum | +/-(VDTR – 0.4 V) VDC minimum |
| Receive Data (RXD) |
+/-15 VDC operating +/-25 VDC absolute maximum |
+/-15 VDC operating +/-20 VDC absolute maximum |
|
Communication (bursts of 5 ms transmit with 10 ms idle between bursts) |
Transfer Rate: 9600 bps, 33% duty cycle; 8 data bits, no parity, 1 stop bit | Transfer Rate: Selectable 9600, 19.2k, 38.4k, 57.6k, 115.2k bps, all at 33% duty cycle; 8 data bits, no parity, 1 stop bit or configurable |
|
DTR Current Or Auxiliary Supply Current (Positive supply to unit) |
See below | * 2.7 mA minimum required under all operating conditions with cable capacitance limited to 1000pF (and practically unlimited inrush current) |
| Power On | 12 mA Max (and practically unlimited inrush current) | See above. |
| Transmitting | 11 mA typical, 5 ms duration | 11 mA typical, 5 ms duration |
| Quiescent | 6 mA typical, continuous | See above. |
| RXD Current | Within RS-232 specified limits (does not function as a negative supply to unit | Average current approximates that of a normal RS-232 load. (Negative supply to unit) |
| Output Cable | Not Specified | See note "*" below. |
Mechanical
| Dimensions |
3.86 in (98.0 mm) – Allow 0.30 in (7.6 mm) for cable thickness and tie wrap at the rear of the unit 4.00 in (101.6 mm) 1.00 in (25.4 mm) |
| Weight | 4.1 oz (115 g) including 6' cable |
Environmental
|
Printed Circuit Assembly 21067502 (discontinued) |
Printed Circuit Assembly 21067505 (new unit) |
|
| Temperature | ||
| Operating | 4 °F to 158 °F (-20 °C to 70 °C) | -40 °F to 158 °F (-40 °C to 70 °C) |
| Storage | -40 °F to 176 °F (-40 °C to 80 °C) | -40 °F to 176 °F (-40 °C to 80 °C) |
| Humidity | ||
| Operating | 10% to 90% noncondensing | 10% to 90% noncondensing |
| Storage | 10% to 90% noncondensing | 10% to 90% noncondensing |
Standard Configurations
| Description | P/N |
| Track 2 | 21066014 |
| Track 1 | 21066015 |
General
| Recording Method | Two-frequency coherent phase (F2F) |
| Card Speed Through Unit | 3 to 50 inches per second |
| Reading Capacity* |
Track 1, 210 BPI, 34 characters alphanumeric Track 2: 75 BPI, 16 characters numeric Track 2: 128 BPI, 27 characters numeric |
| Life | 300,000 passes (150,000 insert cycles) |
Electrical
| Power Requirements | +5VDC ± 5% at 13mA (typical) |
| Output Signal Levels using 74HCT367 |
Vol=0.4V at 2mA Voh=Vcc -0.5 V at 2mA |
Mechanical
| Dimensions |
Height: 0.89 inch (22.6mm) Length: 2.66 inches (67.6mm) Width: 2.36 inches (60.0mm) |
Electrical
| Operating Temperature | 32 °F (0 °C ) to 140 °F (60 °C) |
| Operating Humidity | 10% to 90% noncondensing |