This program can be used in any Windows environment to test the communication with the IntelliPIN. The program allows commands to be manually entered and shows the response messages. It is a useful tool for a programmer to test command sequences and evaluate responses. It also can be used with the MTD Device Driver.

The MagTek USB driver is necessary to use the APTM USB, CAPS4 USB, IntelliPIN USB, Mini MICR USB, or MICRImage USB models with a Windows Operating System. These devices can be installed on the same PC if required. After you unzip the files to a folder on your hard disk, attach the device to the PC. In order to install them on 32-bit system, select the USB-32 folder; to install them on a 64-bit system, select the USB-64 folder.

The MICR Plus/IntelliPIN OCX combines the features of both devices into a common OCX so that the MICR Plus and the IntelliPIN can be operated via a single serial port (with the IntelliPIN attached to the MICR Plus aux port).

This demo incorporates the MICR Plus/IntelliPIN OCX to show how easy it is to communicate with the MagTek MICR Plus with an attached IntelliPIN. This demo can be used to acquire data via IE web browser.