Welcome to the 2024 product catalog. MagTek sells to VARs, ISOs, ISVs, resellers, distributors, and directly to customers. Contact MagTek or your service provider to order. Founded in 1972, MagTek is a leading manufacturer of electronic systems for the reliable issuance, reading, transmission, and security of cards, barcodes, checks, PINs, and identification documents.

MAKE ACCEPTING MOBILE PAYMENTS MORE SECURE THAN EVER. In partnership with Otterbox®, a privately-owned consumer electronics accessory company based in Fort Collins, Colorado that produces water-resistant, shock-resistant, and drop-resistant cases for mobile devices, MagTek has engineered the tDynamo (Gen II) uniVERSE Clip. The MagTek uniVERSE Clip is made to take advantage of Otterbox cases using the uniVERSE Clip, making it easier to have swappable modules for your needs.

tDynamo (Gen II) is the next generation of tDynamo SCRAs with the added functionality to accept Apple VAS and updated EMV certification. tDynamo (Gen II) is ideal for reading magnetic stripe cards, contact and contactless EMV cards, and NFC mobile wallets for line-busting, centralized countertop, or roaming teller solutions. Learn more about the reader in this brochure.

Developers often couple this with D998200191, Programming Manual, and the XML/SOAP zip examples found under software, D998200391 (MPPGv3) or D998200457 (MPPGv4). The Magensa Payment Protection Gateway (MPPG v3/4) provides POS integrators an interface to various merchant processors for magstripe and EMV (chip card) transactions using MagTek readers. This guide outlines the steps to integrate and certify to MPPG for EMV processing.

This document provides instructions on how to interact with MagneFlex Navy, browser-based for USB SCRAs and PIN PED devices

This document describes how to communicate with the tDynamo (Gen I, II) Secure Card Reader Authenticator (SCRA), with details on the low level commands, configuration, and communication.

Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo (Gen I, II), DynaWave, and iDynamo 6, Programmers Reference ( C++ )

Pursuing an L3 Certification (Level 3 Certification) with an EMV (Europay, Mastercard, Visa) payment processor involves several steps. Level 3 Certification typically pertains to testing and certifying integrated circuit cards (ICCs) with advanced functionalities, such as contactless payments. Here are the general steps you might follow, but keep in mind that specific requirements may vary based on the EMV payment processor and the region.

This document provides instructions for software developers who want to create software solutions that include a Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo (Gen I, II), DynaWave, or iDynamo 6 connected to a Windows-based host via USB or Bluetooth LE.

This document provides EMV transaction flow instructions for software developers who want to create software solutions that include a MagTek Secure Card Reader / Authenticator (SCRA) device connected to a Windows PC, Android, or iOS device.

This document provides instructions for software developers who want to create .NET software solutions that include MagTek devices connected to a Windows based host. MagTek Universal SDK (MTUSDKNET) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK. This document is part of a larger library of documents designed to assist MagTek device implementers. The following documents are essential: • D998200383 DynaFlex Products Programmer’s Manual ( COMMANDS ) • D998200382 DynaFlex Family of Products Installation and Operation Manual

This document provides instructions for software developers who want to create iOS software solutions that include MagTek devices connected to an iOS host. MagTek Universal SDK (MTUSDK) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK. This document is part of a larger library of documents designed to assist MagTek device implementers.

This document provides instructions to use the MTNET Demo. It is part of a larger library of documents designed to assist Dynamag, DynaMAX, eDynamo, uDynamo, aDynamo, mDynamo, tDynamo (Gen I, II), iDynamo 5 (Gen III), DynaWave and Secure Card Readers implementers.

ADYNAMO, UDYNAMO, DYNAMAG, DYNAMAX, EDYNAMO, MDYNAMO, BULLET, TDYNAMO, DYNAWAVE, IDYNAMO 5 (GEN III) MAGTEK SCRA DEMO AND OEM DEMO GUIDE (ANDROID) This document provides instructions to use the MagTek SCRA Demo and OEM Demo. It is part of a larger library of documents designed to assist Dynamag, DynaMAX, Dynamo, mDynamo, tDynamo, DynaWave, and Secure Card Readers implementers.

This document provides instructions for software developers who want to create custom software solutions that communicate with DynaMAX, eDynamo, aDynamo, iDynamo, uDynamo, kDynamo, sDynamo, or tDynamo connected to an iOS host via audio connector or BLE. It is part of a larger library of documents designed to assist DynaMAX, eDynamo, aDynamo, iDynamo, and uDynamo, kDynamo, sDynamo, tDynamo implementers.

The purpose of this document is to provide a description of how to use the MagTek Reader Configuration Program for Remote Configuration and Key Injection for MagneSafe® devices.

How to Perform a Remote Firmware and IPEK Key Update Using the MagTek Reader Configuration Tool. This document lays out the procedures for using MagTek’s Reader Configuration Tool to perform a remote firmware update, and remote IPEK Key update. For additional support, contact MagTek Support Services.

Point-of-service and point-of-sale needs to be fast, reliable and secure. tDynamo (Gen I, II) delivers on all three and meets the growing demand from your customers to use the latest in technology in the easiest-to-use form factor. The tDynamo (Gen I, II) reader is a simple way to take a wide variety of payment methods, in a small, versatile device. tDynamo (Gen I, II) is a three way card reader (magnetic stripe, chip card, contactless).

The purpose of this document is to walk users through the steps to update MagTek tDynamo through Bluetooth LE with the latest firmware, EMV tags, and CAPK files as required by the Card Brands. This process requires the use of MagTek’s free Reader Management System iOS app. This update process should take less than 15 minutes per device.

The purpose of this document is to walk users through the steps to update MagTek tDynamo (Gen II) through USB with the latest firmware, EMV tags, and CAPK files as required by the Card Brands. This process requires the use of MagTek’s free Reader Management System application. This update process should take less than 15 minutes per device.

Point-of-service and point-of-sale needs to be fast, reliable, and secure. tDynamo delivers on all three and meets the growing demand from your customers to use the latest technology in the easiest-to-use form factor. tDynamo is a simple way to take a wide variety of payment methods, in a small, versatile device including magnetic stripe, chip card, and contactless.

tDynamo (Gen I, II) Docking Stand Quick Installation Guide describes basic installation of the tDynamo (Gen I, II) stand

A response to a publication in March 2019, by NIST (National Institute of Standards and Technology) entitled: “NIST Special Publication 800-131A Revision 2 – Transitioning the Use of Cryptographic Algorithms and Key Lengths”.