iDynamo 6 is an SCRA with magnetic stripe, EMV contact, and EMV / NFC contactless reading capabilities. Cafés and restaurants, boutiques and large retailers will benefit from iDynamo 6, the next generation of MagTek secure card reader authenticators (SCRAs). iDynamo 6 reads magstripe cards, EMV chip cards (contact and contactless), and NFC enabled mobile wallets including Samsung Pay, Google Pay, and Apple Pay.

Welcome to the 2024 product catalog. MagTek sells to VARs, ISOs, ISVs, resellers, distributors, and directly to customers. Contact MagTek or your service provider to order. Founded in 1972, MagTek is a leading manufacturer of electronic systems for the reliable issuance, reading, transmission, and security of cards, barcodes, checks, PINs, and identification documents.

Make Accepting Mobile Payments More Rugged and Secure than Ever. In partnership with OtterBox®, a privately-owned consumer electronics accessory company that produces water-resistant, shock-resistant, and drop-resistant cases for mobile devices, MagTek has engineered iDynamo 6 Lightning and iDynamo 5 (Gen II) UNIVERSE clips. The MagTek UNIVERSE clip is made to take advantage of OtterBox cases using the UNIVERSE clip, making it easier to have swappable modules for all of your payment needs.

Provide your merchant customers with the most secure and reliable mobile card readers on the market. Financial Institutions can future-proof investments when they choose MagTek solutions. Protect your brand and enhance your customer experience with MagTek’s mobile Secure Card Reader Authenticators (SCRAs). SCRAs connect to most mobile smart phones or tablets and can capture more data with a single swipe.

Information about MagTek's mobile secure card readers. Merchants around the globe rely on MagTek’s mobile Secure Card Reader Authenticators (SCRAs). MagTek’s SCRAs capture data with a single swipe and offer the reliability and flexibility retailers need for ease-of-use. SCRAs are powered by the MagneSafe™ Security Architecture (MSA) which delivers dynamic card authentication, data encryption, tokenization, and device/host authentication to protect customers from identity theft and card fraud.

Developers often couple this with D998200191, Programming Manual, and the XML/SOAP zip examples found under software, D998200391 (MPPGv3) or D998200457 (MPPGv4). The Magensa Payment Protection Gateway (MPPG v3/4) provides POS integrators an interface to various merchant processors for magstripe and EMV (chip card) transactions using MagTek readers. This guide outlines the steps to integrate and certify to MPPG for EMV processing.

This document provides instructions on how to interact with MagneFlex Navy, browser-based for USB SCRAs and PIN PED devices

This document describes how to communicate with Secure Card Reader Authenticator (SCRA) devices which implement MagneSafe V5.

Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo (Gen I, II), DynaWave, and iDynamo 6, Programmers Reference ( C++ )

Pursuing an L3 Certification (Level 3 Certification) with an EMV (Europay, Mastercard, Visa) payment processor involves several steps. Level 3 Certification typically pertains to testing and certifying integrated circuit cards (ICCs) with advanced functionalities, such as contactless payments. Here are the general steps you might follow, but keep in mind that specific requirements may vary based on the EMV payment processor and the region.

This document provides instructions for software developers who want to create software solutions that include a Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo (Gen I, II), DynaWave, or iDynamo 6 connected to a Windows-based host via USB or Bluetooth LE.

This document provides EMV transaction flow instructions for software developers who want to create software solutions that include a MagTek Secure Card Reader / Authenticator (SCRA) device connected to a Windows PC, Android, or iOS device.

This document provides instructions for software developers who want to create .NET software solutions that include MagTek devices connected to a Windows based host. MagTek Universal SDK (MTUSDKNET) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK. This document is part of a larger library of documents designed to assist MagTek device implementers. The following documents are essential: • D998200383 DynaFlex Products Programmer’s Manual ( COMMANDS ) • D998200382 DynaFlex Family of Products Installation and Operation Manual

This document provides instructions for software developers who want to create iOS software solutions that include MagTek devices connected to an iOS host. MagTek Universal SDK (MTUSDK) incorporates MagTek SCRA and MagTek PIN Pad SCRA devices into one SDK. This document is part of a larger library of documents designed to assist MagTek device implementers.

aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, iDynamo 6, iDynamo 5 (Gen III), BulleT Secure Card Reader/ Authenticator .Net/PCL Programmer's Reference Manual (Windows / Windows Phone)

ADYNAMO, UDYNAMO, DYNAMAG, DYNAMAX, EDYNAMO, MDYNAMO, BULLET, TDYNAMO, DYNAWAVE, IDYNAMO 5 (GEN III) MAGTEK SCRA DEMO AND OEM DEMO GUIDE (ANDROID) This document provides instructions to use the MagTek SCRA Demo and OEM Demo. It is part of a larger library of documents designed to assist Dynamag, DynaMAX, Dynamo, mDynamo, tDynamo, DynaWave, and Secure Card Readers implementers.

This document provides instructions for software developers who want to create custom software solutions that communicate with DynaMAX, eDynamo, aDynamo, iDynamo, uDynamo, kDynamo, sDynamo, or tDynamo connected to an iOS host via audio connector or BLE. It is part of a larger library of documents designed to assist DynaMAX, eDynamo, aDynamo, iDynamo, and uDynamo, kDynamo, sDynamo, tDynamo implementers.

The purpose of this document is to provide a description of how to use the MagTek Reader Configuration Program for Remote Configuration and Key Injection for MagneSafe® devices.

How to Perform a Remote Firmware and IPEK Key Update Using the MagTek Reader Configuration Tool. This document lays out the procedures for using MagTek’s Reader Configuration Tool to perform a remote firmware update, and remote IPEK Key update. For additional support, contact MagTek Support Services.

The purpose of this document is to review installation and operation of the iDynamo 6 secure card reader authenticator. iDynamo 6 is an SCRA with magnetic stripe, EMV contact, and EMV / NFC contactless reading capabilities.

The purpose of this document is to provide a quick overview of iDynamo 6 and how to connect the device with Lightning connection. For additional details please refer to the Installation and Operation manual.

The purpose of this document is to provide a quick overview of iDynamo 6 and how to connect the device with USB C. For additional details please refer to the Installation and Operation manual.

The purpose of this document is to walk users through the steps to update MagTek iDynamo 6 with the latest firmware, EMV tags, and CAPK files as required by the Card Brands. This process requires the use of MagTek’s free Reader Management System iOS app. This update process should take less than 15 minutes per device.

Using Magensa Gateway services the decision was easy. Quantic offers a robust multi-channel POS solution that supports in-person, online, and in-app payments.

MagTek and Magensa deliver hardware, software, and services for mobile and contactless solutions. The dramatic shift in how business is conducted, from restaurants and retail to banks and hospitals, requires tools and services that provide an agile and secure response.

MagTek delivers more clicks for Payment Processors with reliable services and secure hardware.